The Raspberry Pi's IO Functionality in an easy-to-use API for Mono/.NET/C#

Rust library for interfacing with i2c devices under Linux

arduino libraries for keypad interface on I2C bus

Generate SSDT hotpatches for your Touchable Device and get ready for VoodooI2C! 😜

Implementation of I2C-bus written in Golang. Forked from davecheney/i2c.

A clone of the i2c-tiny-usb based upon STM32 and libopencm3

Raspberry Pi Go Language Interface

Fixed built-in I2C driver for Arduino ESP8266 core

Arduino library for communicating with Nintendo extension controllers

A Linux kernel driver for ch341 emulating the I2C bus

This i2c sniffer can sniff the activities on an i2c bus running at up to 100kBaud. It runs on an Arduino Mega 2560 and needs 8 kB RAM.

A Wiki about common mistakes when using the Arduino Wire library.

MPU9250 (MPU6500 + AK8963) I2C Driver in Python for Raspbery PI

This is an Arduino library for HD44780 LCD display, operated in 4 bit mode over I2C bus with 8-bit I/O expander PCF8574

Fast, Lightweight STM32 I2C HAL Driver for the MPU6000/MPU6050 IMU

MLAB hardware modules and building blocks

Software emulated I2C for Raspberry using wiringPi

Finds every I2C device on the bus.

A simple driver for ESP8266 enthusiasts out there to drive MCP23017 16-bit IO Expander

Reads data from MPU6050 using a RaspberryPI and sends to ROS (Rosbridge)

GPS Tracking Device using SMS - GPS Module connected to STM32F4 Eval Board - LCD Display interfaced via I2C bus

I²C controleld PWM generator based on ATTiny85

I2C IOServer implements i2c protocol support in CDP for Linux

Arduino interface to Makernet, a family of I2C-driven devices

Arduino Library for the TEA5767 Radio Module

An arduino project to allow the connection of Wii accessories as USB HID game controller devices using UnoJoy and Wire (I2C). Nunchucks and arcade sticks are supported and tested, classic game controller support is untested. Update rate is approximately 100Hz.

The coolSAA1064 arduino library handles the 7 segment Philips / NXP SAA1064 driver for easily displaying and scrolling numbers and words on up to four displays.

Pi4j-I2C-LCD

Bus and Device classes for i2c-bus, with promised functions.

This Java library supports the INA219 voltage, current and power monitor from Texas Instruments with a Raspberry Pi using the I2C bus.